Home inspections are very important, whether you’re making sure your home is safe or looking for problems before a sale. However, a traditional home inspection can still miss some crucial details in your home. This is where thermal imaging really shines, as it can reveal these details without any issues. From potential leaks to electrical shortages, thermal imaging can reveal all sorts of things before they become actual problems. As such, this particular type of home inspection has been rising in popularity recently. If you’re still not convinced, we’ve put together a list of six benefits of thermal imaging in a home inspection, highlighting all of its significant advantages.

1 Highly convenient and quick

One of the main benefits of thermal imaging is that it’s very quick to set up and complete. This is because thermal imaging only requires a set of thermal imaging cameras, which are very lightweight and easy to move around. Additionally, the entire process doesn’t take too long, and you can expect to have results reasonably quickly.

As a homeowner, you should know how important being proactive is, as many issues can get very expensive to fix. So, occasionally hiring experts to perform thermal home imaging is a reasonably good idea. Doing this will let you pinpoint potential issues before they become costly to fix. All in all, compared to how much you potentially have to pay to fix problems, investing in an occasional home inspection is very much worth it.

2 Spotting air leaks

If you’re worried that your insulation has a fault somewhere, thermal imaging is the best way to find it. This is because thermal imaging uncovers all irregularities in the heat spread of a home. So, it becomes incredibly easy to spot any air leaks thanks to this. Thermal imaging will identify potential air leaks around doors, windows, roofs, or anywhere else. This is vital if you want to ensure the home’s insulation is intact and can save you quite a bit of money in the long run. After all, if there are no air leaks, your HVAC system doesn’t have to try as hard to keep your home’s temperature stable, so your bills will become lower, saving you money in the long run.

3 Revealing electrical faults

As we already mentioned, being proactive with problems is incredibly important for homeowners, and this especially applies to electricity. Electrical faults can be dangerous and even start a fire in your home in worst-case scenarios. And unfortunately, this is something a regular home inspection can’t detect reliably before it actually becomes a problem.

However, one of the six benefits of thermal imaging is that it can spot overheating or overloaded circuits before they do any damage. In addition, the process can also point out failed motor bearings before they become an issue. All in all, as electrical faults are among the most dangerous issues a homeowner can face, revealing them before any damage is done is very valuable. So, if you’re worried about electrical faults in your home, you should consider doing a thermal imaging inspection.

4 Detection accuracy

Where human eyes can fail to spot problems, thermal imaging doesn’t miss any details. Because the process relies entirely on measuring the heat distribution of surfaces in a building, problems can be spotted in seconds, without fail. For example, water leaks can be somewhat difficult to spot while they’re still fresh. But, with thermal imaging, they become pronounced very quickly, no matter how small the leak might be. This also applies to things such as gas leaks, air leaks, and so on. Of course, other types of home inspections, such as full or four-point inspections, have their advantages. But, it’s a fact that if you want quick and accurate, thermal imaging home inspections are the way to go.

5 Requires minimal preparation

Thermal imaging works by measuring the heat distribution of surfaces in a building, which means it’s completely noninvasive. Additionally, you don’t have to prepare your home too much before the inspection. In a traditional home inspection, your inspector would have to get up close and personal with almost everything in your home. This isn’t required through thermal imaging, so you don’t have to worry as much about cleaning everything up and ensuring all vital parts of your home are fully accessible. All in all, thermal imaging is generally a bit more expensive than traditional home inspections. However, that time saved purely from the preparations is worth the investment.

6 Detecting potential problems with structural integrity

Making sure your home is structurally sound is one of the main reasons why you’d want to get a home inspection in the first place. Thankfully, thermal imaging can also help with this. When surfaces like walls, floors, and roofs are damaged, this can be spotted in how heat is distributed across them. With this in mind, you can see how practical thermal imaging is when spotting these problems. Even the tiniest crack can create an air leak and change heat distribution across a surface. So, at the end of the day, thermal imaging is one of the most effective ways to check a building’s structural integrity.

Six benefits of thermal imaging in a home inspection – wrap up

Overall, home inspections are crucial for homeowners who want to avoid issues. And, as anyone will tell you, prevention is the best way to deal with potential problems with your home anyway. As such, having a quick and accurate way to pinpoint potential issues before they become serious is invaluable for homeowners. With all this said, we’d like to point out that thermal imaging hits all these requirements and more. All in all, thermal imaging is the best choice for making sure your home is safe and sound. We hope this list of six benefits of thermal imaging in a home inspection helps you, and we wish you a good day.

 

Bio:
Harvey Price is a home inspector passionate about spreading information about the best ways to ensure homes are safe. In the past, he’s worked with strongassmovers.com to help people ensure their homes are secure before moving in.